P51D 1650

Designed By R.Bulk

Specifications:

• Wing Area: 50 dm2
• Wing Span; 1650 mm
• Flight Weight: Starts at 4800 grams
• 6 Channel Controls

Design Features:

• All Formers And Ribs CNC Cut
• Unique Tab Lock Design
• Two Piece Design Easy transportation
• Motor/Battery compartment Easy accessible
• Battery Access Through cowl opening

• download Instructions here
• Full Size Rolled Cad Plans With All Parts Shown
• Vacuformed motor cowl, airintake,spinner,canopy
• Designed for retracts

• 6 Channel Radio.Light weight Receiver:
• Electric retract set, or air, wheels 100mm
• Light weight Servos: About 13grams (4x ailerons elevator flaps and rudder)
• You need Control Horns , Steering Cables,Hinges,small parts,aluminium sheet for retract doors
  
• 35-75 amp controller
• Some paint, glass finish
• Battery: 6s5000 lipo
• Thick and Thin CA glue 5-6 bottles
• Grass or concrete airfield
• Motor: type SK3-5055-430KV turnigy

There is no hardware in the P51D kit

All info for retracts, motor etc is on the drawing, The P51D is a really fine flyer

all wood build not hard and very rewarding

There are a lot of cnc cut sheets of ply and balsa in the kit (210 cnccut parts)
5 vacuumformed parts and a large 1:1 drawing

Wood build wing in 2 parts joined

Stabilizers all wood 

Motor mounting flexible use distance rings for different motors

A spinner is also included , very light.

And easy flying also , flaps are in but not really neccesary, easy battery acces