TA183 "Huckebein"

• For mini fan 480 and 3 or 4 lipo
• Power req :Hetrc edf 2w or 2w-20 or 3W
• Controls: 3x servo
• Including: cad drawing, Canopy ,Cowl,inlet
• Photo instructions
• Wood build precision kit

A superfast model, very soft landing
As you can see on the image we have added fences on the wings, these are necessary for good flying, without it the TA183 will spin out of the air sooner or later, but now it is a delight to fly. You need to be capable of flying a fast jet, because with the Hetrc edf 2 w or 3w it is ballistic. You can get even faster with the edf 2w-20type but we choose the 3w for duration. Now we can fly 5+ minutes at full speed with ease.

Design Features:

• All Formers And Ribs CNC Cut
• Unique Tab Lock Design
• One Piece Design

Specifications:

• Wing Area: 14 dm2
• Wing Span; 800 mm
• Flight Weight: Starts at 900 grams
• Wing Loading: 64gr dm2 to 75gr dm2
• 4 Channel Elevator, Ailerons & Throttle (ailerons mixed for slower landing speed) 

Kit Includes:

• Photo Instructions
• Full Size Rolled Cad Plans With All Parts Shown
• Vacuformed Canopy , Intake Duct and Motor Cover 
• Paper Intake Tube , PVC Outlet Tube
• There is no hardware in the kit

Required to Complete:

• Any inexpensive 3 Channel Radio
• Light weight Receiver:
• Light weight Servos: About 9 grams (2x)
• Motor: Hetrc edf 2W (3 lipo) or 2W-20(4 lipo)
• Speed controller 60-80 amps
• Wemotec Mini Fan 480 
• Battery: 3S or 4S 3200 lipo
• Thick and Thin CA glue
• Bungee Launch req.
• Control Horns , Steering Cables
• The Huckebein needs a 8mmx7,5mtr bungee with 8kg of pulling power.

Wings are straight forward

Basic fuselage

Intake tube

Added some sheeting 
Tailplane and Elevator

Wings with joiners

Not going in to much details, but finished

Tailplane control

Battery access

Underside

Hardware installation